Please note: each pack of Dyofix Pond Black comes with a suggested method of application, a product health and safety data sheet, a pond volume calculator and a pair of protective gloves.
Method 1: For ponds with 1000 Litres (225 Gallons) of water
- Half fill a bucket or watering can from the pond.
- Wearing gloves, remove the tamper evident seal from the pack of Dyofix Pond Black.
- Carefully remove the lid.
- Pour the contents of the pack into the bucket or watering can.
- Using a stick, stir the water until the Dyofix Pond Black has dissolved.
- If the water feature has a waterfall, pour the contents at the head, if not, pour the contents into different parts of the pond to achieve an even distribution.
- Put some clean water into the bucket or watering can to rinse it out and then pour it into the pond.
Method 2: For smaller ponds
- Rinse out a 2 litre, soft drinks bottle, remove the label and leave to dry.
- Wearing gloves, remove the tamper evident seal from the pack of Dyofix Pond Black.
- Carefully remove the lid.
- Make a paper funnel and insert into the neck of the bottle.
- Pour the Dyofix Pond Black into the bottle.
- Gently half fill the bottle with warm water (this helps the Dyofix Pond Black to dissolve).
- Put the lid onto the bottle and shake it vigorously.
- Pour a little of the mixture into the pond.
- Gently stir the pond until the Dyofix Pond Black is evenly distributed.
- Repeat steps 8 and 9 until the water looks Black.
- Store the unused mixture in a cool, dark, safe place.
- It is advisable to write on the bottle "Dyofix Pond Dye - DO NOT DRINK" and make sure that it kept out of the reach of young children.
Method 3 for water soluble sachets
- Throw water soluble sachets at various points
- Wait
- Repeat until the pond water looks black
- Open bottle of wine, sit back and admire the finished product :)
If you need further information please email our sales department or call us on 0113 256 4251.
